************************************************************
      SMJ Enable Bidi Control Tool Ver 1.0.0
         Readme_En.txt             Star Micronics Co., Ltd.
************************************************************

 1. Overview
 2. Supported OS
 3. How to use
 4. Copyright
 5. Release History

===========================
 1. Overview
===========================

  This software is for enabling bidirectional control of printer queue for StarMicronics printer.

===========================
 2. Supported OS
===========================

  Supported OS : Windows 7/8.1/10
  Target OS    : Windows 10 Fall Creators Update (1709)

===========================
 3. How to use
===========================

  When using 32-bit OS, please use "x86" folder.
  When using 64-bit OS, please use "x64" folder.

  - If you want to check the execution status of the tool
     Please execute "SMJEnableBidiControl.bat".
    
  -If you do not want to check the execution status of the tool
     Please execute "SMJEnableBidiControl_Silent.bat".
    
  (for Developer)
  The application execution result can be judged by checking content of "ERRORLEVEL".
  Correspondence of "ERRORLEVEL" and execution result is following.
  
    %ERRORLEVEL%==0 Success
    %ERRORLEVEL%==1 Failure

===========================
 4. Copyright
===========================

  Copyright 2017 Star Micronics Co., Ltd. All rights reserved.

===========================
 5. Release Notes
===========================

  11/06/2017    Ver. 1.0.0  First Release
